• COLOP E/40 Replacement Ink Pads – Pack of 3 E40 Refill Pads Compatible with Printer 40 & Compact 40 Self Inking Stamps
1 1

stampninja

COLOP E/40 Replacement Ink Pads – Pack of 3 E40 Refill Pads Compatible with Printer 40 & Compact 40 Self Inking Stamps

COLOP E/40 Replacement Ink Pads – Pack of 3 E40 Refill Pads Compatible with Printer 40 & Compact 40 Self Inking Stamps

£12.99 GBP
£12.99 GBP
Taxes included. Shipping calculated at checkout.
Ink Colour
View full details

stampninja

About this cartridge

To guarantee the best quality just original COLOP spare pads should be used. The COLOP E/40 Spare Pads are electronically inked with high quality inks for sharp and clear impressions. They fit perfectly for the latest version of Printer 40 and Printer C 40.
 
The ink in these replacement cartridges is water-based. It is only suitable for stamping onto standard matt/un-coated finished paper/card.

Exact fit

Compatible stamps

Match your stamp to a compatible product below before ordering.

Clean replacement

How to change the cartridge

Work over scrap paper and avoid touching the inked pad surface. Exact lock positions vary slightly by stamp model.

1

Compress slightly

Press the stamp down only a few millimetres—just enough to release pressure from the cartridge.

2

Lock the position

Use the side locks while the stamp is held slightly compressed. Keep fingers clear of the rubber text plate.

3

Slide pads across

Push the old cartridge out from one side while guiding the new cartridge in with the inked face down.

4

Unlock and test

Release the locks, make several impressions on scrap paper and allow the ink to distribute evenly.

If the impression is still patchy

Check that the cartridge is fully seated and correctly oriented. Remove dried paper fibres or debris from the rubber text plate carefully, then test again without adding excess ink.

Replacing the rubber text plate too?

Fit a fresh matching cartridge at the same time. The previous design can leave a lasting depression in the old pad and cause uneven inking on the new text plate.

Why order from Stamp Ninja

Stamp expertise behind the spare parts

100,000+Stamps produced

Experience across personalised, business and specialist stamp ranges.

2017Operating since

Supplying stamps and replacement products since 2017.

BB1Blackburn based

Customer support and stamp production are handled from Blackburn.

COLOPAuthorised products

Obsesso Ltd holds written COLOP authorisation to list genuine COLOP products.

Useful answers

Replacement cartridge questions

How many replacement pads are included?

Check this product’s description for the pack contents and review your selected option and quantity in the basket.

Will a similar-size cartridge fit my stamp?

Not necessarily. Match the complete E/ code and exact stamp model. The casing, rails and depth can differ even when two pads look similar or produce a similar impression size.

What surfaces suit the standard ink?

Standard pre-inked colours are water-based and intended for absorbent matt, uncoated paper and card. They are not a general solution for glossy, coated or non-porous surfaces.

What does Dry – No Ink mean?

The cartridge is supplied without ink. Add only an ink confirmed as compatible with the pad, rubber text plate and intended surface; an unsuitable ink can damage the stamp or produce poor impressions.

Can I re-ink the old cartridge instead?

A fresh matching pad gives more even ink distribution and avoids overfilling. COLOP recommends replacing the cartridge rather than repeatedly refilling an old, compressed or contaminated pad.

Why replace the pad with a new text plate?

The previous rubber design can leave a lasting depression in the pad surface. A new cartridge helps ink the replacement text plate evenly from the first impression.

Need a different COLOP cartridge?

Compare the current cartridge range, or ask Stamp Ninja to check a model number before you order.

Compare all cartridgesAsk Stamp Ninja