How to Get Your Logo Ready for a Stamp

A logo stamp is one of the easiest ways to brand your paperwork, packaging and loyalty cards without paying for printing every time. But a logo that looks great on your website doesn't always look great as a stamp. A stamp prints one solid colour from a raised surface, so the artwork has to work within those limits.

The good news is that a few minutes spent preparing your logo makes a big difference to how crisp the final impression looks.

How a stamp "sees" your logo

It helps to understand what happens to your artwork. On a self-inking stamp, the design is turned into a text plate where the printing areas stand up and everything else is cut away. When you press the stamp, ink sits on the raised parts and transfers to the paper.

That means every part of your logo is either printing or not printing. There's no in-between. Colours, gradients, drop shadows and soft edges can't be reproduced as they are, because the stamp has nothing to represent "a bit lighter" or "half see-through". If you'd like to know more about the mechanism, our guide to how a self-inking stamp works walks through it.

So the first job is to make sure your logo makes sense in a single colour.

Start with a one-colour version

Many businesses already have a one-colour or black version of their logo, often called a mono or single-colour version. If you have one, use it, as it will almost always stamp better than a converted colour file.

If you only have a colour logo, look at it in black and white before uploading. Ask yourself:

  • Do two different colours sitting side by side turn into one solid blob?
  • Is there a light colour, such as yellow or pale grey, that might disappear completely?
  • Does the logo rely on shading or a gradient to show its shape?

If the answer to any of those is yes, it's worth asking whoever designed your logo for a simplified one-colour version. Solid shapes and clear outlines are what you're after.

Avoid photos, gradients and shadows

Photographic images don't translate into stamps. A photo is made of thousands of subtle tones, and a stamp can only print solid areas, so the result tends to look like a dark patch with little detail.

The same applies to:

  • Gradients, where colour fades from dark to light
  • Drop shadows and glows behind text or shapes
  • Textured backgrounds, such as a watercolour wash or a grainy effect

Strip these back to the solid shapes underneath, and the logo will stamp far more cleanly.

Watch the fine detail

A stamp impression is small. Our logo stamps range from 20mm squares up to rectangles of 77 x 36mm, and your whole logo has to fit inside that area. Detail that looks fine on a computer screen can shrink to almost nothing.

Things to keep an eye on:

  • Very thin lines. Hairline outlines and delicate flourishes can break up or fill in.
  • Tiny text. A strapline or web address underneath a logo often becomes too small to read. If it's not essential, consider leaving it out.
  • Small gaps. Letters or shapes that almost touch can merge into one when ink is pressed onto paper.

As a rule of thumb, if you have to squint to read part of your logo when you shrink it to the stamp size on screen, it will be hard to read on paper too. Our post on choosing a font for a rubber stamp covers the same idea for wording.

Choose a shape that suits the logo

The shape of your logo should guide the stamp you pick. A round or square logo usually sits best on a square stamp, while a wide wordmark suits a rectangular one.

Our square logo stamps come in sizes from 20mm to 43mm, and the rectangular options are 37 x 12mm, 45 x 18mm, 58 x 22mm and 77 x 36mm. The stamp size guide is a handy way to compare them against what you'll be stamping. A bigger impression gives fine detail more room, so if your logo is fairly intricate, go up a size rather than down.

If you want your business name, address or contact details alongside the logo, look at our text with logo stamps instead, so the wording is set properly next to the artwork rather than squeezed into the image.

Upload the best file you have

When you personalise a logo stamp on our site, you can upload a PNG, JPEG or WebP file, and a high-resolution file is preferred. A few tips:

  • Use the original file from your designer rather than a screenshot or an image saved from social media, which is often small and blurry.
  • A plain white or transparent background works best. Busy backgrounds can confuse which parts should print.
  • Crop away unnecessary empty space around the logo so it fills the stamp area properly.

Check the preview like it's your proof

As you personalise your stamp, you'll see a live preview on screen. That preview is your proof. We don't email proofs, so take a moment to look at it carefully before you add it to your basket.

Zoom in if you can. Check that nothing important has disappeared, that small text is still readable and that the logo is the right way up and centred. If something doesn't look right in the preview, it won't look right on paper either, so go back and adjust the file.

A note on ink colour and paper

You choose the ink colour when you order, from black, red, blue, green or violet. Pick the colour you'll want to keep, because once a pad has been used it can't be changed to a different colour: the pad absorbs its ink. When the impression starts to fade, fit a replacement ink pad in the same colour. Our replacement pads come in packs of three.

Logo stamps work best on absorbent, matt paper and card. They're not suitable for glossy surfaces, coated card or clothing.

Ready to order?

Personalised logo stamps are made to order in Lancashire. Order before 2pm Monday to Friday and we dispatch the same day (COLOP EOS stamps are made differently and aren't dispatched same day). UK delivery is by Express, 1 to 2 business days, costing £4 on orders under £15 and free on orders of £15 or more.

Back to blog